DTF Joker — Heat Press Guide
Professional settings for consistent results and maximum durability.
General Application Settings
  • Temperature: 290–320°F
  • Time: 8–15 seconds
  • Pressure: Medium (35–45 psi / 3–4 bar)
  • Peel: Hot peel — remove film immediately while warm

Use a Teflon sheet, silicone pad, or parchment paper during pressing for even heat & protection.

Fabric Temp (°F) Time (sec) Pressure Peel Notes
Cotton310–32012–15MediumHot PeelBest wash durability
Polyester285–3008–10LightHot PeelLower heat to avoid scorch
Cotton/Poly Blend300–31010–12MediumHot PeelReduces dye migration
Spandex / Lycra285–2958–10LightHot PeelDo not stretch fabric
Denim32015–20FirmHot PeelPre-press 2–3s before
Fleece / Wool30012–15MediumHot PeelExtra press to flatten
Leather / PU275–2856–8LightHot PeelTest first
Protective Layer
Always use a Teflon sheet, 0.3 mm silicone pad, or parchment paper to prevent marks and ensure even heat distribution.
Second Press (Fixation)
Press again at 305–310°F for 5 seconds with medium pressure to lock the ink & increase wash durability.
DTF Transfer Care Instructions
  • Wash inside out — max 30°C (86°F)
  • Do not bleach, tumble dry, or dry clean
  • Do not iron directly on print — turn inside out or use protective cloth
  • Wait 24 hours before first wash
  • Avoid fabric softeners — they may affect adhesion
  • Hang dry for longest life
  • Store away from moisture & sunlight