My Store
Let's Build Your Own Gang Sheet Wholesale
Let's Build Your Own Gang Sheet Wholesale
Want to order Wholesale?
Want to order Wholesale?
In order to... order wholesale, you should first decide if you want to buy half a roll or a full one.
Let's say you want to buy half a roll
1. You should select the half roll variant that is written in red.
2. As stated in pharantesis, you should order 6 pieces of this variant. You can use different designs in these 6 pieces.
3. If your cart contains 6 pieces of Half Roll variant, then you'll automatically be granted a 10% discount.
Each variant is sized 22x360 inches
CHRISTMAS MADNESS — 25% OFF EVERYTHING! NO CODES. NO LIMITS. JUST PRINT.
Main Description
Welcome to the chaos-free zone.
Here, you’re the designer — and Joker’s your printer.
Upload your logos, art, or designs, drag them into place, and watch your sheet come alive in real time.
No limits, no confusion, no boring tools — just pure DTF power.
Total Design Freedom
Arrange, resize, rotate, and fill your sheet exactly how you want.
Create your perfect layout — from one logo to a full sheet of art — it’s all up to you.
Real-Time Builder Preview
See your design exactly how it’ll print.
Every move updates instantly — no guessing, no mistakes.
Smooth & Simple Interface
Drag. Drop. Done.
You don’t need to be a designer to make magic here — our builder is fast, visual, and effortless.
Print It Fast
Once your layout’s ready, just hit “Order Now” — we’ll print it with Joker precision and ship it UPS Express in 1–3 days.
Pro Tip
Pack your designs tight, use every inch — the more you fit, the more you save.
Joker’s Promise
We don’t do boring.
We do chaos-free creativity — sharp prints, fast delivery, and pure DTF energy.
Build it your way. Print it our way. Perfectly.
Heat Press Process (DTF Joker Standard)
Temperature: 290–320°F
Time: 8–15 seconds
Pressure: Medium (35–45 psi / 3–4 bar)
Peel: Hot Peel — remove film immediately while warm
Fabric-Specific Recommendations
| Fabric Type | Temp (°F) | Time (sec) | Pressure | Peel | Notes |
|---|---|---|---|---|---|
| Cotton | 310–320 | 12–15 | Medium | Hot Peel | Durable, best wash resistance |
| Polyester | 285–300 | 8–10 | Light | Hot Peel | Lower heat to avoid scorching |
| Cotton/Poly Blend | 300–310 | 10–12 | Medium | Hot Peel | Helps reduce dye migration |
| Spandex / Lycra | 285–295 | 8–10 | Light | Hot Peel | Do not overstretch fabric |
| Denim | 320 | 15–20 | Firm | Hot Peel | Use firm pressure; pre-press 2–3 sec |
| Fleece / Wool | 300 | 12–15 | Medium | Hot Peel | Press longer to flatten surface |
| Leather / PU | 275–285 | 6–8 | Light | Hot Peel | Test first; low heat only |
Protective Layer:
Always use a Teflon sheet, 0.3 mm silicone pad, or parchment paper between the film and heat press. This prevents gloss marks and keeps pressure even.
Second Press (Fixation):
After peeling, perform a second press at 305–310°F for 5 seconds with medium pressure to lock the print into the fabric and boost wash durability.
DTF Transfer Care Instructions (DTF Joker Standard)
• Wash garment inside-out at 30°C (86°F) or below.
• Do not bleach, tumble dry, or dry clean.
• Do not iron directly on the print — turn inside-out or use a protective cloth.
• Wait 24 hours before the first wash.
• Avoid fabric softeners — they may affect adhesion.
• Hang dry when possible to extend print life.
• Store garments away from moisture and direct sunlight.
